Are you interested in bobby pin lock picking techniques? The terrible situation of losing your keys can really be avoided by utilizing this approach, but it only works with conventional door locks and necessitates the use of hairpins to make a tension bar and a pick tool for picking the lock. Read this article to master the fundamentals of lockpicking if you want to discover how to pick a lock with bobby pins. Additionally, Locksmith Tools supplies are reasonably priced.

How Basic Locks Work

Locks are straightforward devices that, to those who are familiar with how they operate, actually offer very little security. Therefore, we must first comprehend our goals inside the lock before beginning the actual lockpicking process.

Pin tumbler

The housing that keeps everything together, along with the plug, drive pin, key pin, spring, and shear wire, make up the fundamental six components of a tumbler lock. Although each component is vital, the shear line is our primary concern. Because the shear line physically separates the plug from the housing and passes through the pin, the lock cannot be turned without the proper key. The driver pin is forced out of the plug when the right key is put into the lock, which elevates the keyed lock flush with the cut line. We can rotate the plug and disengage the lock when the distance between the key pin and drive pin is precisely equal to the cut line. Lockpicking's goal is to imitate a key by bringing the pin flush with the shear line, which will enable us to spin the lock and unlock it.

Making a Barrette Lock Pick

Two tools—a pick (obviously) and a tension wrench—are required to pick a lock.

Lock Pick: With the help of the pick, we can raise the pin to the shear line just like a key. Although there are many various types of lock picks you can make using bobby pins, this post will concentrate on hook picks.

Tension Wrench: This strange tiny device is used to turn a lock, much like a key. The purpose of this tool will be discussed after picking.

Hairpin lock pick

Making our hairpin lock picks is a quick and simple process. First, we're going to separate the bobby pin's round end from its straight side. The use of teeth, pliers, or even fingernails can be used to accomplish this with ease. We can begin bending once the rubber ends have been removed. To begin, loosen the bobby pins and roughly straighten the hair. The next step is to push the bobby pin's straight end into the lock's keyhole about a centimeter, or approximately 1/3 inch, and exert enough pressure to bend the end into a hook. This should be the end outcome.

How to pick a lock with a bobby pin

We must first learn how to use our hairpin tension wrench before we can play with our new toy. As was briefly described previously, this tiny instrument serves two purposes.

It first provides us with the leverage we need to turn the plug with tension, just like a key. Second, while plucking, this tiny, bent piece of metal assists us in keeping the pin in place on the shear line. But what should I do? Let's see, then.

Keep in mind that the binding pin will, well, bind and prevent the plug from rotating when rotational strain is applied to the plug. We use our pick to push the pin to the cut line once it has been bonded. Everything comes together in this area.

The plug will gently rotate as it searches for the next binding pin that is farthest from the true centerline once the first binding pin hits the shear line. But then another strange thing occurred. The pin we press up firmly on will land on top of the stopper because of the little rotation of the stopper, and as long as you keep the right tension, it will stay there. For more lockpicking guides, please check https://www.okgameblog.com/2022/10/17/types-of-locks-and-how-to-choose-them/.